shower pan and stuff

Name: Mark
Posted: Mon, Apr 12, 2010 at 10:41 am MST
Well here I am deep into my bathroom remodel and I am approacing the one tin I am dreadin the most. The shower pan.
My shower will end up being a 3' X 7' masterpiece of tiling and plumbing. I hope.

My issue is this: I have done electical, plumbing, tile work, and pretty mush everythign else but I ave never done a shower pan.

I ave the concrete, the liner, the additive and a good idea of what needs to be done. I am just afraid I will mess it up.

The current plan is to tile teh shower floor, but if I screw up the pan I can see teh tile cracking and all kinds of bad things happening. I have seen some very impressive thingks done with river rock that would look sharp and adress this concern, but that seems liek a thing a guy could screw up.

My question: what are the common mistakes people make when doing their own shower pan and how can I avoid these same mistakes.
Name: Rd Tile
Posted: Mon, Apr 12, 2010 at 4:23 pm MST
Reply: 1
Name: Not Alot Of Help
Posted: Tue, Apr 13, 2010 at 10:55 am MST
Reply: 2

Huh?. A page with 2 short paragraphs about some tiling system they don't even describe?.I'm confused.
Name: Rd Tile
Posted: Tue, Apr 13, 2010 at 1:34 pm MST
Reply: 3
What is it that's confusing, you want me to explain in detail how to build and tile a shower pan?
Name: Kenk
Posted: Tue, Apr 13, 2010 at 8:25 pm MST
Reply: 4
So you don't know how to click on links?


And this page
Has a number of other links - some to videos even!
Name: E3
Posted: Wed, Apr 14, 2010 at 11:51 am MST
Reply: 5
There are different ways of doing it as well as types of membrane. The Noble Co. Site shows 3 different methods.
1. Mud bed
2 thin set
Thread Limit: 15 of 20 replies remain open.